How to Install a Ghost Immobiliser
Ghost immobilisers are hidden security system that shields your car from key cloning and hacking. It stops the engine from starting until a PIN code is entered. This could be as long as 20 characters.
It is not detected by thieves, who are unlikely to think about this additional layer of security. Some systems have an app that allows the owner to disarm their immobiliser in the event of forgetting their PIN or utilize the service/valet mode.
Connecting the vehicle's CAN Bus to the vehicle's
The Ghost 2 Immobiliser, a cutting edge security system, can be incorporated directly into the ECU of your vehicle. It offers a discrete protection against thieves. It is highly efficient and user-friendly. This makes it an excellent addition to your vehicle's security arsenal. However, just like any other anti-theft system, it is not 100% reliable and requires regular maintenance to ensure its operation. This guide will help you get the most of your Ghost 2 immobiliser.
CAN (Controller Area Network) is a robust serial networking, allows microcontrollers communicate with each other over small distances. Central control units is not required. It is designed to multiply electrical wiring in vehicles, saving on copper. It has numerous advantages, including the low cost and ease of use.
In the majority of modern cars In modern cars, the CAN protocol is used to communicate with various systems, such as the engine management system (EMS) transmission controller, steering module as well as air conditioning controls and many more. It also transmits data from sensors including speed sensors and inputs to control different features of the car. The CAN bus can be used to monitor the health of these different components and can stop the vehicle from starting if it is in an unsafe condition.
While the CAN bus could be utilized for a variety of purposes, it's crucial to understand how it works and how it's secured. It's possible to add new features to vehicles using CAN bus, however it's crucial to safeguard it against hackers and other threats. Installing a firewall and monitoring your CAN bus with software is the best method to accomplish this.
Ghost2's discrete control unit is hidden in the dashboard or wiring harness, which prevents a thief from physically tampering it. It is also impossible to reset a PIN code or emergency code without access to the car.
If you have to hand over your vehicle for maintenance, valet parking, or any other reason, you can turn on the Transport Mode. This feature will disable the Ghost immobiliser's ignition and keyfob functions, and will only be activated when the vehicle is speeding at 31 mph for a period of 15 minutes.
How do ghost 2 immobiliser problems create a PIN code
The Ghost immobiliser is a powerful security system that protects your vehicle from theft. The revolutionary technology utilizes a PIN to shut down the engine of the vehicle and stop it from starting without the right code or an authorized fob or mobile. The system's sleek design makes it virtually invisible and offers unrivaled protection against theft. Moreover the system is TASSA tested and could result in significant savings on insurance premiums for cars.
During the installation, the Ghost system goes into an learning mode that records the sequence of buttons pressed to create your unique pin code. Once the pin code is created the installer will guide you through the process of activating the system. Once activated the Ghost system disables your vehicle's starting motor unless you enter a valid PIN or switch the vehicle to transport mode. This makes it extremely difficult for thieves or cloners who want to hack or replicate your starter system.
Installing a Ghost immobiliser is easy however it is essential to follow the detailed instructions in the user guide to ensure proper operation. Basic hand tools will assist in making the perfect connections and a multimeter will help you verify electrical values. Insulation tape as well as heat shrink tubing and cable ties can be used to shield wires from damage. Test the system on regular basis to identify any issues that could be.
It is important to check the system one final time before you turn on the ignition. Ghost immobilisers will arm themselves after 3 to 30 seconds, dependent on the model of your car. The system also has an option for Service/Valet that allows you to temporarily disable the system while servicing your vehicle or valet parking.
The immobiliser can be hidden under the dashboard or behind the steering wheel. Make use of a small piece of duct tape or paint on the wires of the CAN H and CAN L to make them easier to locate during testing. In addition the CAN H and CAN L wires must be connected to a power source that is able to provide constant 12V. It is important to check the connections again after testing because an incorrect identification of these wires may cause system malfunction.
Activating the system
A ghost immobiliser blocks your car from starting until you press certain buttons on the vehicle, typically on the steering wheel or door panel, or the central console. The sequence is decided by the user and can be altered as needed. Once activated, the system will not be removed. This makes it a great choice for anyone who wants to secure their vehicle from theft.
The system is designed to be undetectable. This means it cannot be detected by modern diagnostics or code-grabbing technologies. It does not emit radio frequency either which makes it harder for thieves to identify.
If the device is detected, it will prevent the engine from starting and sound a loud alarm to deter thieves. The device can be used to monitor the location of a vehicle, which will help police recover the vehicle in case it has been stolen.
If you're interested in a ghost-immobiliser get in touch with the experts at Car Specalist Customs to get a quote and discuss your options. We are fully trained to install a ghost immobiliser on your vehicle and will make sure that it is tucked away in a remote area. We can also install additional security measures, including a kill switch and wheel lock, to protect your vehicle from theft.
Disarming the System
If you own a Ghost immobiliser that is fitted to your vehicle, it's vital to know how to disarm it. You can use this in the event that you lose your keys or your car battery dies. The system uses an individual PIN code that only you know, which means the immobiliser won't start your vehicle unless you enter this code. The easiest way to enter the code is to press a set of buttons on your dashboard or the steering wheel. This is much easier than using a key fob, and prevents others from copying the remote.
In contrast to some aftermarket immobilisers that require cutting wires for installation, Ghost2 is non-invasive and integrates with your vehicle's CAN bus network to function. Its most prominent characteristic is that it disables the engine without affecting normal functions of the vehicle. This makes it difficult for thieves to use signal boosts or duplicate keys to car keys. It does not emit radio frequency, therefore thieves won't be able to detect it.
The Ghost system also comes with a Transport Mode that allows you to temporarily disable the security system for circumstances like transportation or servicing. This feature is great for when you're loaning your vehicle to someone else without sharing your PIN code, or if your vehicle needs to be kept secure while you drive it. To activate Transport Mode, press the service button 5 times within 2 seconds. The Ghost system will confirm activation with five indication signals.
Save the emergency code outside your vehicle in a secure location. Then, if you ever find yourself locked out of your vehicle, you can contact the technician or the company who installed the system and they'll provide you with the code. If they are not able to contact you, you can always try to contact an authorized dealer however this will require verification procedures and could incur additional costs.
In addition to the convenience of this system, you can count on it to guard your vehicle from theft and reduce insurance costs. Many insurance companies offer reduced monthly premiums, or even financial incentives to install this anti-theft technology.